The skin analyser from our beauty product range, uses the latest Bioelectric Impedance Analysis (BIA) technology to immediately and automatically detects the factors affecting your skins conditions, such as moisture, oil, and softness, displaying the results on the LCD screen with convenient graphical illustration and description for the user to understand. Other factors that affect your skins condition are your diet, health condition, lifestyle and external environment.
BIA is the abbreviation for bioelectric impedance analysis, which employs bio impedance as the measuring theory to determine the percentage of fat free mass (body liquid and electrolyte) and fat mass (fat does not contain water) in our body tissues; impedance belongs to one of the resistances in which the non-conductor is involved.
The skin analyser does not just analysis skin moisture but your skins oil and softness levels. It is suitable for the following: outdoor demonstrations, personal use and consultations. We hope this product will give you convenience and unimaginable surprise. Please read these instructions carefully to make sure you use the skin analyser from our beauty product range correctly
BIA is the abbreviation for bioelectric impedance analysis, which employs bio impedance as the measuring theory to determine the percentage of fat free mass (body liquid and electrolyte) and fat mass (fat does not contain water) in our body tissues; impedance belongs to one of the resistances in which the non-conductor is involved.
The skin analyser does not just analysis skin moisture but your skins oil and softness levels. It is suitable for the following: outdoor demonstrations, personal use and consultations. We hope this product will give you convenience and unimaginable surprise. Please read these instructions carefully to make sure you use the skin analyser from our beauty product range correctly
How it works
1) When the battery is installed, the system will enter
full-screen status with the “DI” sound as in picture 1 and
then enter off status
1) When the battery is installed, the system will enter
full-screen status with the “DI” sound as in picture 1 and
then enter off status
2) Remove the cap and the two probes can be seen as in
picture Press the start button, the LCD lights and the
system runs self-testing automatically. At this point the
skin analyser indicating squares visualize from the middle to
both sides in order as picture 3. After self testing, the
analyser will show the testing is correct with the sound
and then the “DI” analysing can begin
picture Press the start button, the LCD lights and the
system runs self-testing automatically. At this point the
skin analyser indicating squares visualize from the middle to
both sides in order as picture 3. After self testing, the
analyser will show the testing is correct with the sound
and then the “DI” analysing can begin
3) When the system is on stand-by, all the indicating squares flash at the same time as in Picture 4. At this point put the probes onto the skin pointed to the skin area to be analysed and use a little pressure to make the probes fully connect as in picture 5
4) After 4 seconds the system will show the analysing has finished with the “DI” sound and the analyser can be removed. At this point after about 2 seconds of stable results the analysing result can be read as in picture 7
5) If the two probes are not in contact or not in full contact with the skin, or in contact with thick hair or other non-skin objects the system will switch to stand by and the system will show an “ERROR” as in picture 8. This will happen if there is not full contact with the skin within 4 seconds
Picture 8 The analyser showing “ERROR”
Picture 8 The analyser showing “ERROR”
6) When no key is pressed in result displaying status, the analyser will enter “OFF” status automatically. The analyser needs 25 seconds to analyser from pressing the start button to stand by, result displaying and automatic “off” status.
7) To clean the probes after each use a piece of cotton wool or soft tissue will be suffice to remove any oil etc. Always replace the cap to avoid any damage
8) It is recommended to use the skin analyser 15-20 minutes after a shower, to ensure the daily damage from the environment (grease, dust etc) will not be on the skin and the results will show the true condition of your skin
7) To clean the probes after each use a piece of cotton wool or soft tissue will be suffice to remove any oil etc. Always replace the cap to avoid any damage
8) It is recommended to use the skin analyser 15-20 minutes after a shower, to ensure the daily damage from the environment (grease, dust etc) will not be on the skin and the results will show the true condition of your skin
Prolou Skin Analyser
 (372 x 263).jpg)
WAS £19.95
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
Click for larger view
 |
Frequently asked questions. Click Go..